Fayl:XRT schematic.jpg

Vikipediya, azad ensiklopediya
Naviqasiyaya keçin Axtarışa keçin

XRT_schematic.jpg(514 × 331 piksel, fayl həcmi: 38 KB, MIME növü: image/jpeg)

Bu fayl "Vikimedia Commons"dadır
və digər layihələrdə istifadə edilə bilər.
təsvir səhifəsi
təsvir səhifəsi
Faylın təsvir səhifəsinə get

Xülasə

İzah
English: The layout of the XRT is shown in the schematic. Swift's X-Ray Telescope (XRT) is designed to measure the fluxes, spectra, and lightcurves of GRBs and afterglows over a wide dynamic range covering more than 7 orders of magnitude in flux. The XRT can pinpoint GRBs to 5-arcsec accuracy within 10 seconds of target acquisition for a typical GRB and can study the X-ray counterparts of GRBs beginning 20-70 seconds from burst discovery and continuing for days to weeks.
Tarix
Mənbə Swift: Catching Gamm-Ray Bursts on the Fly. NASA Goddard Space Flight Center
Müəllif Swift PI: Neil Gehrels, Responsible NASA Official: Phil Newman Web Curator: J.D. Myers PAO Contact: Francis Reddy
İcazə
(Faylın təkrar istifadəsi)
Images produced by NASA are usually free of copyright [...]

The XRT is a focusing X-ray telescope with a 110 cm2 effective area, 23.6 x 23.6 arcmin FOV, 18 arcsec resolution (half-power diameter), and 0.2-10 keV energy range. The XRT uses a grazing incidence Wolter 1 telescope to focus X-rays onto a state-of-the-art CCD. The complete mirror module for the XRT consists of the X-ray mirrors, thermal baffle, a mirror collar, and an electron deflector. The X-ray mirrors (left) are the FM3 units built, qualified and calibrated as flight spares for the JET-X instrument on the Spectrum X-Gamma mission (Citterio et al. 1996; Wells et al. 1992; Wells et al. 1997). To prevent on-orbit degradation of the mirror module's performance, it is be maintained at 20 +/- 5 degrees C, with gradients of <1 degree C by an actively controlled thermal baffle (purple, in schematic below) similar to the one used for JET-X. A composite telescope tube holds the focal plane camera (red), containing a single CCD-22 detector. The CCD-22 detector, designed for the EPIC MOS instruments on the XMM-Newton mission, is a three-phase frame-transfer device, using high resistivity silicon and an open-electrode structure (Holland et al. 1996) to achieve a useful bandpass of 0.2-10 keV (Short, Keay, & Turner 1998).

Lisenziya

Public domain This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
Warnings:

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

təsvir edir

15 avqust 2008

Faylın tarixçəsi

Faylın əvvəlki versiyasını görmək üçün gün/tarix bölməsindəki tarixlərə klikləyin.

Tarix/VaxtKiçik şəkilÖlçülərİstifadəçiŞərh
indiki01:04, 12 sentyabr 200901:04, 12 sentyabr 2009 tarixindəki versiyanın kiçildilmiş görüntüsü514 × 331 (38 KB)Marshallsumter{{Information |Description={{en|1=The layout of the XRT is shown in the schematic. Swift's X-Ray Telescope (XRT) is designed to measure the fluxes, spectra, and lightcurves of GRBs and afterglows over a wide dynamic range covering more than 7 orders of ma

Aşağıdakı səhifə bu faylı istifadə edir:

Faylın qlobal istifadəsi

Bu fayl aşağıdakı vikilərdə istifadə olunur:

Metaməlumatlar