Valeh Baxşəliyev

Vikipediya, azad ensiklopediya
Naviqasiyaya keçin Axtarışa keçin
Valeh Baxşəli
Valeh İsmixan oğlu Baxşəli
Doğum tarixi (65 yaş)
Doğum yeri Ağdam, Azərbaycan
Fəaliyyəti alim
aztu.edu.az/azp/vbakhsha…

Valeh İsmixan oğlu BaxşəliTexnika elmləri doktoru. Azərbaycan Texniki Universitetinin "Mexanika" kafedrasının müdiri.

Həyatı[redaktə | mənbəni redaktə et]

Valeh İsmixan oğlu Baxşəli 1959-cu ildə anadan olmuş, 1975-ci ildə Ağdam rayonunun Xudu Məmmədov adına Mərzili kənd orta məktəbini, 1980-ci ildə Azərbaycan Politexnik İnstitutunun (indiki AzTU) Mexanika fakültəsini bitirmişdir. 1987-ci ildə "Maşınların, cihazların və aparatların dinamikası, möhkəmliyi" ixtisası üzrə dissertasiya müdafiə edərək texnika elmləri namizədi – PhD (elmi rəhbəri: mərhum prof. N.B. Qədirov) və 2007-ci ildə həmin ixtisas üzrə texnika elmləri doktoru elmi dərəcəsi almışdır.

O, NORD – elmi tədqiqat institutunda mühəndis-konstruktor (1980-1983), AzTU-nun "Nəzəri Mexanika" (indiki "Mexanika") kafedrasında aspirant (1983-1985), assistent (1986-1992), baş müəllim (1992-1994), dosent (1994-2011), 2011-ci ildən professor vəzifəsində çalışmış və 16.11.2016-cı il tarixindən həmin kafedranın müdiri vəzifəsinə təyin edilmişdir. Həmçinin 2006-2013-cü illərdə Xəzər Universitetində və 2003-cü ildən 2017-ci ilədək Azərbaycan Dövlət Neft və Sənaye Universitetinin nəzdində fəaliyyət göstərən ABŞ - ın Corciya Dövlət Universitetinin BBA və MBA Proqramlarında Texniki və Tətbiqi Mexanika, Maşın və mexanizmlər nəzəriyyəsi və Maşın hissələri fənnlərini ingilis dilində tədris etmişdir.

Avropa Komissiyası Tədqiqat və Texnoloji İnkişaf üzrə 7-ci Çərçivə Proqramı hüdudlarında (www.bs-era.net) Qafqaz ölkələrindən yeganə qalib Layihənin Elmi Konsorsiumunun (Almaniya, Türkiyə, Gürcüstan, Azərbaycan) rəhbəri olmuşdur.

Elmi maraq dairəsi: nəzəri və tətbiqi mexanika, materiallar müqaviməti, maşın mexanikası, maşın hissələri və tribologiya, fasiləsiz təhsilin problemləri.

Elmi yaradıcılığı[redaktə | mənbəni redaktə et]

Prof. Valeh Baxşəli Nəzəri və tətbiqi mexanika, Maşın dinamikası, Tribologiya və Təhsil sahələrində ölkə daxilində və xaricdə 200-dək elmi məqalə və konfrans məruzələri, monoqrafiyalar, dərslik və dərs vəsaitləri çap etdirmişdir. Maşın və mexanizmlərin möhkəmliyi və etibarlığı sahəsində ciddi elmi nəticələrin, həmçinin Nəzəri mexanikadan paralel qüvvələr sisteminin mərkəzinin (cismin ağırlıq mərkəzinin) tapılmasına aid bir neçə teoremin və Tribologiya üzrə hipotezlərin müəllifidir.

Onun 3 monoqrafiyası xaricdə - nüfuzlu nəşriyyatlarda (LAP Lambert Academic Publishing (Almaniya), İnternational Springer Publisher) nəşr edilmişdir:

Onun elmi işlərinə Rusiya, Gürcüstan, Türkiyə, Almaniya, İngiltərə, ABŞ, Çexiya, Rumıniya, Serbiya və s. ölkələrdə dissertasiya və məqalələrdə istinadlar olunmuşdur:

O, Maşın və Mexanizmlər üzrə Beynəlxalq Federasiyanın “Problems of Mechanics” (Journal of IFToMM - International Federation for the Promotion of Mechanism and Machine Science) və American Journal of Mechanical and Industrial Engineering (ABŞ) beynəlxalq elmi jurnallarının redaksiya heyətinin, həmçinin “Texnika” (Bakı) jurnalının redaksiya heyətinin üzvüdür.

Bir neçə xarici elmi jurnalların (Journal of Nanoengineering and Nanosystems, USA; Journal of Mechanical Engineering Science (impact factor: 0,730), UK və s.) rəyçisi (reviewer), beynəlxalq elmi konfransların təşkilat komitəsinin üzvü olmuşdur:

Akademik mübadilə çərçivəsində Prof. İhsan Doğramacının dəvəti ilə Türkiyənin Bilkənt Universitetində (03.07.1995-11.09.1995), DAAD (Alman Akademik Mübadilə Xidməti) xətti ilə Prof. Dr. Richard Markertin dəvəti ilə Almaniyanın Darmştadt Texniki Universitetində (15.10.2006-15.12.2006) və Prof. Dr. Wolfgang Seemann-ın dəvəti ilə Karlsruhe Universitetində (01.10.2009-30.11.2009), həmçinin Avropa Birliyinin Proqramları çərçivəsində dəfələrlə Avropanın (Kembric U., Karlsruhe U., Ştutqart U. və s.) və ABŞ-nin (Nyu York, Texas, Hyuston, Miçiqan və s.) aparıcı universitetlərində elmi ezamiyyətlərdə olmuşdur.

Azərbaycan Respublikası Prezidenti yanında Elmin İnkişafı Fondunun 2011-ci il üçün 1-ci qrant müsabiqəsinin fizika-riyaziyyat və texnika elmləri üzrə qalib layihənin (EİF-2011-1(3)) elmi rəhbəri olmuş və fond tərəfindən onun “Mexanikadan izahlı lüğət (terminlər, teoremlər, qanunlar Azərbaycan, rus, ingilis, alman dillərində)” adlı kitabı nəşr olunmuş və yayılmışdır.

O, Avropa Birliyinin INTAS Proqramının (2006) qrant müsabiqəsində iştirak etmiş, Avropa Birliyinin 7-ci Cərcivə Proqramı (BS-ERA.NET Pilot Joint Call 2010/2011) hüdudlarında qalib gəlmiş Elmi Konsorsiumun (Almaniya, Türkiyə, Gürcüstan, Azərbaycan) rəhbəri (koordinatoru) olmuşdur:

“Qara Dəniz regionunda neft və qazın nəqli zamanı istifadə olunan maşın və mexanizmlərin etibarlılığı və möhkəmliyi” (RDMMOGT - Reliability and durability of machines and mechanisms used for oil and gas transportation in Black Sea Region) adlı Avropa Birliyinin Qafqaz ölkələri üzrə yeganə qalib layihənin (2012-2015) rəhbəri olmuşdur:

Avropa Birliyinin HORİZON2020 Tədqiqat və İnnovasiya Proqramının "Smart nəqliyyat" elmi istiqaməti üzrə milli koordinatoru (NCP-National Contact Point) olmuşdur:

O, 4 aprel 2017-ci il tarixində Kembric Universitetində (İngiltərə) keçirilən Avropa Birliyinin Horizon 2020 Proqramı üzrə prioritet istiqamərlərdən biri olan "Nanotexnologiyalar və mütərəqqi materiallar" (Nanotechnilogies and Advanced Materials) mövzusuna həsr olunmuş beynəlxalq konfransda (HORİZON2020 Brokerage Event) iştirak etmiş və ölkəmizi layiqincə təmsil etmişdir. Onun Kembricə ezamiyyətinin maliyyə xərcləri BSHorizon2020 Proqramı (EİF bu proqramın koordinatorudur) tərəfindən ödənilmişdir. Konfrans haqqında geniş məlumatla aşağıdakı linkdə tanış olmaq olar:

ABŞ Dövlət Departamentinin dəvəti ilə INTERNATIONAL VISITOR LEADERSHIP PROGRAM (İVLP) proqramı çərçivəsində o, 29 aprel - 11 may 2017-ci il tarixində ABŞ-nin New York, Nyu Cersi, Miçiqan və Texas ştatlarının aparıcı universitetləri ilə tanışlıq proqramında iştirak etmişdir.

O, 2010-2015-ci illərdə Azərbaycan Respublikasının Prezidenti yanında AAK-nın Ekspert Şurasının üzvü olmuşdur. AzTU-nun Nəqliyyat fakültəsinin Elmi Şurasının və Azərbaycan Respublikası Təhsil Cəmiyyətinin idarə heyətinin üzvüdür.

Beynəlxalq elmi fəaliyyəti (Avropa Birliyinin elmi layihələri) nəzərə alınaraq o, Kembric Universitetinin təsis etdiyi 2011-ci il üçün "Elmi nailiyyətlərə görə Beynəlxalq Eynşteyn Mükafatı"na (The International Einstein Award for Scientific Achievement) və "2011-ci il üçün 100 ən yaxşı mühəndis"(Top 100 Engineers 2011) diplomuna layiq görülmüşdür.

Onun qısa elmi-pedaqoji tərcümeyi-halı Beynəlxalq Kim-Kimdir Ensiklopediyasına (Who is Who in the World, New York, 2012, p. 144) və Azərbaycan Milli Ensiklopediyasına (2011, 3-cü cild, səh.49) daxil edilmişdir.

2001-ci ilin yekunlarına görə kütləvi informasiya vasitələrində ən yaxşı yazı üçün elan olunmuş "Qarabağ harayı" müsabiqəsinin "Qarabağ probleminin həlli yolları" nominasiyasının qalibi olmuşdur.

Yüksək ixtisaslı mütəxəssislərin hazırlanmasında müəyyən xidmətləri vardır. Kafedrada fəlsəfə doktoru və elmlər doktoru proqramı üzrə təhsil alan doktorantlara və magistrlərə elmi rəhbərlik edir. 2011-ci ildə Xəzər Universitetinin 20 illilk yubileyi münasibətilə yüksək ixtisaslı kadrların hazırlanması sahəsində uğurlu elmi-pedaqoji fəaliyyətinə görə fəxri fərmanla təltif edilmişdir.

Azərbaycan Respublikasının Prezidenti İlham Əliyevin 30.12.2020-ci il tarixli sərəncamına əsasən Azərbaycan Texniki Universitetinin 70 illiyi münasibətilə Azərbaycanda mühəndis kadrlarının hazırlanması və texniki elmlərin inkişafında xidmətlərinə görə ona "Əməkdar mühəndis" fəxri adı verilmişdir.

Hazırda AzTU-nun "Mexanika" kafedrasının müdiridir.

Kitabları[redaktə | mənbəni redaktə et]

[1] Qədirov N.B., Baxşəliyev V.İ. Statika məsələlərinin həlli üçün metodik göstəriş. AzTU-nun nəşri, 1990, Bakı, 71s.

[2] Qədirov N.B., Baxşəliyev V.İ. və b. Zərbə məsələlərinin həllinə aid metodik göstəriş. AzTU-nun nəşri, 1994, Bakı, 39s.

[3] Бахшалиев В.И. Динамический анализ поршневых машин, Баку,"Elm",2001, 270с.

[4] Nəsibov N.A., Bağərzadə R.L., Baxşəliyev V.İ., Fərəcov R.M. Nəzəri mexanikadan test yoxlamalarına hazırlıq üçün metodik göstəriş. AzTU-nun nəşri, 2006, Bakı, 32 s.

[5] Nəsibov N.A., Bağırzadə R.L., Fərəcov R.M., Baxşəliyev V.İ., Həbibzadə S.M. Nəzəri mexanikadan test üsulu ilə yoxlama üzrə metodik vəsait. AzTU-nun nəşri, 2006, Bakı, 36 s.

[6] Baxşəliyev V.İ. Nəzəri mexanikadan məsələ həlli. Bakı: "Nurlan", 2009, 222 s.

[7] Bakhshaliev V.I. Mechanics of Piston Machines. Lambert Academic Publishing, Berlin, Germany, 2011, 320p.

https://www.morebooks.shop/store/gb/book/%D0%9C%D0%B5%D1%85%D0%B0%D0%BD%D0%B8%D0%BA%D0%B0-%D0%9F%D0%BE%D1%80%D1%88%D0%BD%D0%B5%D0%B2%D1%8B%D1%85-%D0%9C%D0%B0%D1%88%D0%B8%D0%BD/isbn/978-3-8433-2112-9

http://www.amazon.com/Mekhanika-Porshnevykh-Mashin-kontseptsii-Russian/dp/3843321124/ref=sr_1_1?

[8] Baxşəliyev V.İ. Mexanikadan izahlı lüğət (terminlər, teoremlər, qanunlar Azərbaycan, rus, ingilis və alman dillərində). Bakı: Azərbaycan Respublikasının Prezidenti yanında Elmin İnkişafı Fondu, 2012.- 192 s.

http://sdf.gov.az/development/uploads/qrantlar_uzre_neshrler/2012_valeh_baxseliyev.pdf

[9] Baxşəliyev V.İ. Nəzəri Mexanika: məsələ həlli ilə. Dərs vəsaiti, Bakı: “Elm” nəşriyyatı, 2012, 352 s.

[10] Гурбанов Р.С., Ибрагимов И.Х., Бахшалиев В.И. Теоретическая и Прикладная Механика.Теория, задачи, примеры.Lambert Academic Publishing, Saarbruchen, Berlin, Germany, 2012, 569 pp.

https://www.morebooks.shop/store/gb/book/%D0%A2%D0%B5%D0%BE%D1%80%D0%B5%D1%82%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%B0%D1%8F-%D0%B8-%D0%9F%D1%80%D0%B8%D0%BA%D0%BB%D0%B0%D0%B4%D0%BD%D0%B0%D1%8F-%D0%9C%D0%B5%D1%85%D0%B0%D0%BD%D0%B8%D0%BA%D0%B0/isbn/978-3-8454-3670-8

http://www.amazon.com/Teoreticheskaya-Prikladnaya-Mekhanika-

https://www.morebooks.de/store/gb/category/mechanics[ölü keçid]

https://www.morebooks.de/gb/p_978-3-8454-3670-8

[11] Davitashvili N., Bakhshaliev V. Dynamics of Crank-Piston Mechanisms. Springer Publisher, 2016, 242 pp.

http://www.springer.com/us/book/9789811003226

http://link.springer.com/book/10.1007%2F978-98-10-0323-3[ölü keçid]

http://www.amazon.com/Dynamics-Crank-Piston-Mechanisms-Nodar-Davitashvili/dp/981100322X/ref=sr_1_1?ie=UTF8&qid=1452868937&sr=8-1&keywords=valeh+bakhshaliev

[12] Baxşəliyev V. Tətbiqi mexanika: Nəzəri mexanika və materiallar müqaviməti. Dərs vəsaiti, Bakı, "Elm və təhsil", 2017,452 s.

  1. Qədirov N.B., Baxşəliyev V.İ. Statika məsələlərinin həlli üçün metodik göstəriş. AzTU-nun nəşri, 1990, Bakı, 71s.
  2. Qədirov N.B., Baxşəliyev V.İ. və b. Zərbə məsələlərinin həllinə aid metodik göstəriş. AzTU-nun nəşri, 1994, Bakı, 39s.
  3. Бахшалиев В.И. Динамический анализ поршневых машин, Баку, "Elm", 2001, 270 с. http://www.kitab.az/cgi-bin/catlib2/search.cgi?lang=az&intopi[ölü keçid]
  4. Nəsibov N.A.., Bağərzadə R.L., Baxşəliyev V.İ., Fərəcov R.M. Nəzəri mexanikadan test yoxlamalarına hazırlıq üçün metodik göstəriş. AzTU-nun nəşri, 2006, Bakı, 32 s.
  5. Nəsibov N.A.., Bağərzadə R.L., Fərəcov R.M., Baxşəliyev V.İ., Həbibzadə S.M. Nəzəri mexanikadan test üsulu ilə yoxlama üzrə metodik vəsait. AzTU-nun nəşri, 2006, Bakı, 36 s.
  6. Baxşəliyev V.İ.. Nəzəri mexanikadan məsələ həlli. Bakı: "Nurlan", 2009, 222 s.
  7. Bakhshaliev V.I.Mechanics of Piston Machines.Lambert Academic Publishing,Berlin,Germany, 2011, 320p. https://www.morebooks.de/store/gb/book/%D0%9C%D0%B5%D1%85%D0%B0%D0%BD%D0%B8%D0%BA%D0%B0-%D0%9F%D0%BE%D1%80%D1%88%D0%BD%D0%B5%D0%B2%D1%8B%D1%85-%D0%9C%D0%B0%D1%88%D0%B8%D0%BD/isbn/978-3-8433-2112-9
  8. Baxşəliyev V.İ. Mexanikadan izahlı lüğət. (terminlər, teoremlər, qanunlar Azərbaycan, rus, ingilis və alman dillərində). Bakı: Azərbaycan Respublikasının Prezidenti yanında Elmin İnkişafı Fondu, 2012.-192 s.
  9. Baxşəliyev V.İ. Nəzəri Mexanika: məsələ həlli ilə. Dərs vəsaiti, Bakı: “Elm” nəşriyyatı, 2012, 352 s.
  10. Гурбанов Р.С., Ибрагимов И.Х., Бахшалиев В.И. Теоретическая и Прикладная Механика.Теория задачи, примеры. Lambert Academic Publishing, Saarbruchen, Berlin, Germany, 2012, 569 pp. https://www.morebooks.de/store/gb/category/mechanics,-acoustics/68/5/ru/15_by_title_ASC
  11. Davitashvili N., Bakhshaliev V. Dynamics of Crank-Piston Mechanisms. Springer Publisher, 2016, 242 pp. http://www.springer.com/us/book/9789811003226

Patentləri[redaktə | mənbəni redaktə et]

  1. Bakhshaliev V.I.: Vibration resistant foundation. Patent of Azerbaijan Republic (2004), 03.03.2004, Patent № I 2004 0149, (Bulletin № 1, p. 42-43)

Əsas məqalələr[redaktə | mənbəni redaktə et]

Əsas elmi məqalələr: [1] Kadirov N.B., Bakhshaliev V.I.:The problem of determination of the work of friction forces between piston rod and hermetic rings of a piston compressor machine. Journal of “Oil and Gas” (1985), № 6, p. 80-85

[2] Kadirov N.B., Bakhshaliev V.I.:Definition of the forces acting on a crank-piston mechanism of a piston compressor machine. Transactions of Azerbaijan Technical University (1986), Baku, p. 28-35

[3] Kadirov N.B., Bakhshaliev V.I.:Definition of the friction force moment in friction bearing on the basis of hydrodynamic lubrication theory. Journal of “Oil and gas” (1986), № 12, p. 92-95

[4] Kadirov N.B., Bakhshaliev V.I.:The problem of influence of Constructional and operational parameters to the mechanical loss in a piston compressor machine. Journal of “Azerbaijan Oil Industry” (1986), № 12, p. 56-58

[5] Bakhshaliev V.I.:The development of the method of calculation of mechanical losses in a piston compressor machine. Author’s abstract of dissertation (1988), Baku, 22 pp.

[6] Bakhshaliev V.I.:The research of the diametrical vibration on “floating” connecting rod. Journal of ”Machine building”(1993), Moscow, № 3-5, p. 7-11

[7] Kadirov N.B., Bakhshaliev V.I.:Determination of the equation of connecting rod motion respectively to the piston’s finger and crank. Journal of “Oil and gas” (1993), №3, p. 71-73

[8] Babaev S.G., Bakhshaliev V.I., Kadirov A.R.: Influence of diametrical vibration of turret of lathe to the quality of treat. The Scientific Collection of Azerbaijan Oil Academy (1993), №1, p. 8-5

[9] Bakhshaliev V.I., Mamebov R.T.:The calculation of the longitudinal vibration of “floating” connecting rod of a crank – piston mechanism. Journal of Russian universities News ”Machine building” (1995), Moscow, № 10-12, p. 21-25

[10] Kadirov N.B., Bakhshaliev V.I.:On stability of compressor piston rod operation allowing for its longitudinal vibration. Transactions of Azerbaijan Technical University (1997), Baku, VI volume, № 1, p. 71-73

[11] Bakhshaliev V.I.:Influence of construction parameter of crank shaft to the mechanical losses in piston machine. Transactions of Azerbaijan Technical University (1998),Baku, p. 21-23

[12] Bakhshaliev V.I.: On stability of compressor piston rod operation. Transactions of Academy of Sciences of Azerbaijan (1998), VIII volume, № 3-4, Baku, p. 230-235(in English)

[13] Bakhshaliev V.I., Mirsoev S.H.: The research of the longitudinal vibration of “staggering” connecting rod of crank-piston machine. Journal of “Technics” (2000), Baku, № 3, p. 6-8 (in English)

[14] Bakhshaliev V.I.:The dynamical analyses of crank-piston mechanism of piston machine. Journal of Russian universities News “Machine building” (2000), Moscow, № 3, p. 44-50

[15] Bakhshaliev V.I.:On oscillatory movement of elevator rope. International Scientific Journal (2001), Ukraine, Dоnеsк, Dоn.ТU, Issue 15, p. 21-26

[16] Bakhshaliev V.I.:Development of a method of definition of mechanical losses in flexible transfers. Journal of Russian Academy of Sciences “Problems of Machine Building and Reliability of Machine” (2001), Moscow, № 6, p. 92-97

[17] Bakhshaliev V.I.: Determining the mechanical losses in V-belt drives that used in power plants. Journal of Machinery manufacture and reliability (2001), Allerton Press, USA, No.6, p. 85-90

[18] Bakhshaliev V.I.:The graphical method of determination of problems of parallel force system and centre of mass of solids. Journal of ”Technics” (2001), Baku, № 4 p. 36-42

[19] Bakhshaliev V.I.:Development of a method of definition of mechanical losses in main bearings of the crank shaft of Piston Machine. Journal of Russian Academy of Sciences “Problems of Machine Building and Reliability of Machine” (2002), Moscow, № 2, p. 97-100

[20] Bakhshaliev V.I.: Determining the mechanical losses in the main crankshaft bearings of piston machines. Journal of Machinery manufacture and reliability (2002), Allerton Press, USA, No.2, , p. 91-94

[21] Bakhshaliev V.I.:Calculation of vertical vibration of the foundations under the piston machines. Journal of ”Azerbaijan Oil Industry” (2002), Baku, № 9, p. 41-45

[22] Bakhshaliev V.I., Aslanov F.E.:

Determination of lateral oscillation movement of piston rod of piston machine. Transactions of Mechanical Engineering (2002), Baku, № 12, volume 2, p. 210-214

[23] Bakhshaliev V.I.:The new graphical method of determination of center mass of rigid body. Journal of Moscow State University “Theoretical mechanics” (2003), Issue 24, Moscow, p. 74-80 (Сборник научно-методических статей, серия Теоретическая механика, Изд-во Московского университета Москва, том 24, с. 74-80)

[24] Bakhshaliev V.I.: The methods of account of valve of Piston machine. Journal of ”Technics” (2003), Baku, № 3, p. 30-35

[25] Bakhshaliev V.I.:The analysis of precision of crank-piston mechanism with gaps in piston machines. Journal of Russian Academy of Sciences “Problems of Machine Building and Reliability of Machine” (2004), Moscow, № 3, p. 11-14

http://elibrary.ru/item.asp?id=17642598

[26] Bakhshaliev V.I.: Analysis of the accuracy of the crank-slider mechanism of piston machines with clearances. Journal of Machinery manufacture and reliability (2004), Allerton Press, USA, No.3, p. 1-4

http://mars.arbicon.ru/index.php?mdl=content&id=11165

[27] Bakhshaliev V.I.: The vibration resistant base. Patent of Azerbaijan Republic (2004), 03.03.2004, Patent № I 2004 0149, (Bulletin № 1, p. 42-43)

[28] Bakhshaliev V.I.: Determination of Parameters of gas flow in Pipeline for isothermal processes. J. of ”Azerbaijan Oil Industry”(2005), Baku, № 7, p. 56-59

[29] Bakhshaliev V.I.: Determination of the friction moment of the main sliding bearing of the piston machine under action of variable load. International Journal of the National Academy of Sciences of Belarus “Friction and Wear” (2005), Vol. 26, №5, pp. 539–545.

https://www.elibrary.ru/contents.asp?id=33381273

http://www.ac.by/publications/trenie/tre26_5.html Arxivləşdirilib 2006-10-03 at the Wayback Machine

[30] Bakhshaliev V.I.: Determination of the friction moment of the main sliding bearing of the piston machine under action of variable load. Journal of Friction and Wear (2005), Vol.26,No.5,pp. 539–545,AllertonPress,Inc.,2005,USA http://www.ac.by/publications/trenie/tre26_5.html Arxivləşdirilib 2006-10-03 at the Wayback Machine

[31] Bagirzade R.L., Bakhshaliev V.I.: Research of the movement of Cone on the inclined surface. Interuniversity’s Transactions of Mechanical Engineering (2006), Baku, № 1, volume1, p. 65-75

[32] Bakhshaliev V.I.: Determination of thermal state of sliding Bearing with fluid lubrication. Journal of Friction and Wear (2007), Vol. 28, No. 3, pp. 257–260, AllertonPress,Inc.,2007,USA

https://link.springer.com/article/10.3103/S106836660703004X

https://www.elibrary.ru/contents.asp?id=33386772

http://www.academicpub.com/map/topics/Sliding%2BBearing.html

http://www.academicpub.com/map/authors/V.%2BBakhshaliev.html

[33] Bakhshaliev V.I.: Analysis of impact processes in Piston compressors. Journal of ”Azerbaijan Oil Industry” (2007), Baku, № 8, p. 41-44

[34] Bakhshaliev V.I.:The dynamic analysis and increase of qualitative indicators of piston compressors. Author’s abstract of doctor naouk dissertation (2007), Baku, 45p.

[35] Bakhshaliev V.I., Kadirov A.D., Nushiev M.M.: Problem of influence of the incline of a borehole to the stability of centrifugal pumps. J. of Theoretical and Applied Mechanics (2008), Baku, №1, p. 59-64

[36] Bakhshaliev V.I.: The problem of mathematical simulation of rolling friction. Journal of Friction and Wear (2009), Volume 30, No. 5, p. 305-308, Allerton Press,Inc.,2009,USA

http://link.springer.com/article/10.3103%2FS1068366609050018

http://www.springerlink.com/content/3p4687t601r7m744/[ölü keçid]

https://www.elibrary.ru/contents.asp?id=33385830

http://www.chemie.de/fachpublikationen/journals/journal-of-friction-and-wear/p22/

http://cnplinker.cnpeak.com/outline_article.jsp?channelid=70050&searchword=iid%3D1234722&sortfield=pgf

https://elibrary.ru/item.asp?id=13000646

[37] Bakhshaliev V.I., Hajiyev T.A.Problem of the transformed dry friction at complex movement of a solid body on the horizontal conveyor. Transactions of national scientific- practical conference, Baku, 2010, pp. 556–562

[38] Bakhshaliev V.I. NanoMechanics: New methods of mathematical modelling on tribology of piston machines.Transactions of Azerbaijan Technical University, Baku, 2011, p. 113-115

[39] Davitashvili N., Bakhshaliev V. General task of dynamics of slider-piston mechanism with clearences in kinematical pairs. Scientific Journal of IFToMM “Problems of Mechanics”, Tbilisi, 2012, No 3(48), pp. 21–31

http://www.pam.edu.ge/

http://www.pam.edu.ge/infoen.pdf[ölü keçid]

[40] Bakhshaliev V.I. About a problem of wear process of nanosurface of sliding bearing made of self-lubricating materials. Transactions of the National Academy of Sciences of Azerbaijan. Series of science and innovation. Baku, 2012, No 1 (9), p. 55-58

http://www.innovasiya.az/_assets/uploads/jurnal_1_2012.pdf Arxivləşdirilib 2016-08-08 at the Wayback Machine

[41] Bakhshaliev V.I. Mathematical Modelling of the Wear Process of the Nanosurface of Sliding Bearings Made of Self-Lubricating Materials.Copyright © 2012 Scientific & Academic Publishing, USA,International Journal of Mechanics and Applications, Vol.2, No.4, 2012, pp. 43–48. DOI: 10.5923/j.mechanics.20120204.02

http://journal.sapub.org/mechanics

http://article.sapub.org/10.5923.j.mechanics.20120204.02.html

[42] Bakhshaliev V.I., Hajiyev T. The problem of influence of the sliding friction to the complex motion of a rigid body. Journal of Azerbaijan Oil Industry, № 2, 2012, p. 34-37

[43] Bakhshaliev V. I., Proppe C., Celik E., Davitashvili N. Reliability and durability of Machines and Mechanisms used for Oil and Gas transportation in the Black Sea Region. International Conference “Networking on science and technology in the Black Sea region”, Bucharest-Romania, 11-12 December 2012, p. 6-9

[44] Bakhshaliev V.I., Hajiyev T.A. The problem of influence of the sliding friction to the complex motion of a rigid body. Journal of Azerbaijan Oil Industry, № 2, 2012, p. 34-37

[45] Bakhshaliev V. I., Proppe C., Celik E., Davitashvili N. Reliability and durability of Machines and Mechanisms used for Oil and Gas transportation in the Black Sea Region. International Conference “Networking on science and technology in the Black Sea region”, Bucharest-Romania, 11-12 December, 2012, p. 6-9

[46] Davitashvili N., Bakhshaliev V. Dynamical research of crank-piston mechanisms with clearances in two kinematic pairs with consideration of additional and basic motion of mechanism. Scientific Journal of IFToMM “Problems of Mechanics”, Tbilisi, 2013, No 1 (50), pp. 5–17

http://www.pam.edu.ge/

http://glavicar.ru/wp-content/uploads/2013/09/Nguyen-Minh-Than13.pdf[ölü keçid]

http://www.pam.edu.ge/infoen.pdf[ölü keçid]

[47] Насибов Н.А., Бахшалиев В.И.Исследование движения тяжелой материальной точки по негладкой винтовой линии на основе интегрального принципа Гамильтона-Остроградского. ж. Теоретическая и прикладная механика, 2013, № 1 (29), с. 114-118

[48] Бахшалиев В.И., Асланзаде Ф.Э., Исмаил И.А. К вопросу кинематики «плавающего» шатуна кривошипно-ползунного механизма поршневых машин / Материалы докладов международной конференции по механике и баллистике «VIII Окуневские чтения», 25-28 июня 2013, Санкт-Петерург, Россия, с. 62-64

http://www.okunev.voenmeh.ru/images/MATERIALS-REPORTS.pdf[ölü keçid]

[49] Бахшалиев В.И., Асланзаде Ф.Э., Гаджиев Т.А. К вопросу движения тела с преобразованным сухим трением / Тезисы докладов международной начно- технической конференции «Полимерные композиты и трибология», 24-27 июня 2013, Гомель, Беларусь, с. 41

http://www.technopark-vitebsk.by/documents/finish/4/42[ölü keçid]

[50] Valeh I. Bakhshaliev, Farhad E. Aslan-zada, Ismail A. Ismail. Development of innovative methods of fuzzy logic for increase of durability and reliability of piston machines used in oil industry / Seventh International Conference on Soft Computing, Computing with Words and Perceptions in System Analysis, Decision and Control - ICSCCW- 2013, Izmir, Turkey, September 2-3, 2013, p. 101-110

http://omerakin.etu.edu.tr/Call-for-Papers_ICSCCW-2013.pdf[ölü keçid]

[51] Davitashvili N., Bakhshaliev V., Abaishvili V. Dynamical analysis of crank-piston mechanism with consideration of impacts in kinematic pairs with clearances. International scientific journal of IFToMM “Problems of Mechanics”, Tbilisi, 2013, No 3 (52), pp. 26–44

http://www.pam.edu.ge/

http://www.pam.edu.ge/infoen.pdf[ölü keçid]

[52] Davitashvili N., Bakhshaliev V., Abaishvili V. Dynamic study of crank-piston mechanisms with taking into account the clearances in kinematic pairs and elasticity of links. International scientific journal of IFToMM “Problems of Mechanics”, 2014, No 1 (54), pp. 5 – 28

http://www.pam.edu.ge/

[53] Bakhshaliev V., Kahramanov F., İsmail İ. Development of methods of calculating the mechanical losses and increase the efficiency of the piston machines. Inter. scient. J. of IFToMM “Problems of Mechanics”, special issue of the International Conference “Mechanics-2014”, Tbilisi, Georgia, 19-21 June, 2014, No 2 (55), pp. 61–67

https://www.academia.edu/18672975/Stochastic_Deterministic_

Calibration_of_a_Self_Balanced_Hybrid_Parallel_Serial_

Robotic_Structure

http://www.pam.edu.ge/

http://pam.edu.ge/article?id=20

[54] Davitashvili N., Bakhshaliev V., Bliadze S. Research kinematic and dynamic errors of crank-piston mechanisms. Inter. scien. J. of IFToMM “Problems of Mechanics”, Tbilisi, 2014, No 3 (56), pp. 5–15

http://www.pam.edu.ge/

http://www.pam.edu.ge/infoen.pdf[ölü keçid]

[55] Bakhshaliev V.I. Technical security of the machines used in oil and gas pipelines. Black Sea Horizon project review workshop. Romania, Bucharest, 12th May 2015

http://www.increast.eu/en/703.php?vnr=1123[ölü keçid]

[56] Бахшалиев В.И., Исмаил И.А. К вопросу теплового расчета подшипника скольжения / Тезисы докладов международной начно - технической конференции «Полимерные композиты и трибология» (ПОЛИКОМТРИБ-2015), 23 - 26 июня 2015, Гомель, Беларусь, с. 94

http://mpri.org.by/assets/files/matconf/PolyComTrib2015-Thezis07-07-15.pdf Arxivləşdirilib 2016-08-02 at the Wayback Machine

[57] Bakhshaliev V. Increase of qualitative factors of the machines used on oil and gas pipeline - impact on technical security and environment / European Union Framework Programme for Research & Innovation Horizon 2020 Information Day: Climate Action, Energy, Health and Environment.1-2 July 2015, Baku, Azerbaijan

http://www.inco-eap.net/en/435.php

[58] Davitashvili N., Bakhshaliev V. Dynamics of Crank-Piston Mechanisms. Springer Publisher, 2016, 242 pp.

http://www.springer.com/gp/book/9789811003226#aboutBook

http://link.springer.com/book/10.1007%2F978-981-10-0323-3

http://www.amazon.com/Dynamics-Crank-Piston-Mechanisms-Nodar-Davitashvili/dp/981100322X/ref=sr_1_1?ie=UTF8&qid=1452868937&sr=8-1&keywords=valeh+bakhshaliev

[59] Bakhshaliev V. Machines and equipment used in oil and gas transportation in Caspian and Black Sea Region. - impact on environment. European Commission E&I Workshop: Public Participation and Transparency in the Implementation of Energy Policies, Belgrade, 25-26 February 2016, p. 9

https://ec.europa.eu/jrc/en/event/workshop/e-track-enalrgement-integration-workshop

https://ec.europa.eu/jrc/sites/default/files/Booklet_EI_RS1.pdf

[60] Kərimova İ.M., Qurbanov R.S., Baxşəliyev V.İ. Qayış ötürməsinin mexaniki parametrləri və oxşarlıq meyarları. Azərbaycan Dövlət Dəniz Akademiyasının Elmi əsərləri, № 1, 2016, s. 105-108

[61] Bakhshaliev V.I. Dynamical Analyses of Piston Machines Used in Oil Industry. Journal of Mechanics, Materials Science and Engineering, Austria, MMSE Journal, Vol. 5, July 2016, pp. 216 – 223

http://mmse.xyz/en/ii-mechanical-engineering-physics-2/Dynamical Analyses

[62] Bakhshaliev V.I., Aslanov E.A., Ismail I.A. Investigation the mechanical properties of the parts of piston machines used in oil industry. Materials of International Scientific-Technical Conference "Intellectual technologies in mechanical engineering", Baku, 2016, pp. 457– 460

[63] Bakhshaliev V.I. Increase of mechanical properties of machines and equipment used on oil and gas transportation - technical security of oil and gas pipelines and impact on environment. Horizon 2020 Brokerage Event "Nanotechnologies and Advanced Materials", Cambridge (UK), 4 April 2017

https://www.b2match.eu/h2020nmp2017/participants/144[ölü keçid]

[64] Baxşəliyev V.İ., Hümbətov Q.Ə. Boru kəmərində neft və qazın axınının mexaniki parametrlərinin tapılması məsələsinə dair. "Gənclər və elmi innovasiyalar" mövzusunda keçirilən Respublika elmi-texniki konfransının materialları (II hissə), Bakı, 3-5 may 2017, s.5-7

[65] Baxşəliyev V. Tətbiqi mexanika: Nəzəri mexanika və materiallar müqaviməti. Dərs vəsaiti, Bakı, "Elm və təhsil", 2017,452 s.

[66] Baxşəliyev V.İ., İsmayıl İ.A. Porşenli maşınların çarxqolu-sürüngəc mexanizminin mexaniki xassələrinin analizi. "metallurgiya və materialşünaslığın problemləri" mövzusunda 2-ci beynəlxalq Elmi-texniki konfransın materialları, 28-30 noyabr 2017, AzTU, Bakı, s.311-312

[67] Bakhshaliev V.İ., İsmail İ.A. About technical security of the main pipeline Baku-Tbilisi-Ceyhan. International scientific-technical conference "Natural disasters and human life safety", Baku, December 04-06, 2017, pp. 241–243

[68] Bakhshaliev V.I., Bakirova A.A. Kinematic analyses of the crank-piston mechanisms of piston compressors with gaps in kinematic pairs."Riyaziyyat və mexanikanın aktual problemləri" adlı Respublika Elmi Konfransının materialları, Bakı, BDU, 17-18 may 2018-ci il, p. 10-11

[69] Бахшалиев В.И., Исмаил И.А. Трение и изнашивания наноповерхностей подшипников скольжения, изготовленных из самосмазывающихся материалов, “Ölçmə və keyfiyyət: problemlər, perspektivlər” mövzusunda Beynəlxalq elmi-texniki konfransın materialları, Bakı, AzTU, 21-23 noyabr 2018, c. 169-172

[70] Bakhshaliev V.I., Ismail I.A., Bakirova A.A. About impact processes in kinematical couples of reciprocating compressors. 1st INTERNATIONAL SCIENCE AND ENGINEERING CONFERENCE, Bakı, BMU, 29-30 noyabr, 2018, pp. 148–150

[71] Baxşəliyev V.İ., Salamov O.M., Salamov Ə.A.Abşeron yarımadasında dalğa enerjisindən istifadənin perspektivləri.1st INTERNATIONALONFERENCE ONENERGY OF FUTURE:CHALLENGES AND OPPORTUNITIES (ICEFCO),10-13 SEPTEMBER 2018, BAKU,AZERBAIJAN, pp. 62–64

[72] Baxşəliyev V.İ., Həsənov Z.D. Bakı-Tbilisi-Ceyhan neft kəməri üzərində yerləşən nasos-kompressor stansiyalarının texniki analizi.Azərbaycan xalqının ümummilli lideri H.Əliyevin anadan olmasının 95-ci ildönümünə həsr olunmuş tələbə və gənc tədqiqatçıların “Gənclər və elmi innovasiyalar ” mövzusunda respublika elmi-texniki konfransı, 3-5 may 2018-ci il, AzTU, Bakı, s.14-16

[73] Baxşəliyev V.İ., Hümbətov Q.Ə. Neft və qazın nəqli zamanı istifadə olunan pistonlu maşınınların piston həlqələrinin möhkəmliyi və etibarlılığına dair. Azərbaycan xalqının ümummilli lideri H.Əliyevin anadan olmasının 95-ci ildönümünə həsr olunmuş tələbə və gənc tədqiqatçıların “Gənclər və elmi innovasiyalar ” mövzusunda respublika elmi-texniki konfransı, 3-5 may 2018-ci il, AzTU, Bakı, s.13-14

[74] Bakhshaliev V., Ismail I., Bakirova A. Optimization the wear process and clearances in rotating nanosurfaces of the kinematic couples of reciprocating machines. International scientific journal of IFToMM “Problems of Mechanics”, Tbilisi, 2019, N 1 (74), pp. 17–23

http://www.pam.edu.ge/issue?id=74

http://www.pam.edu.ge/article?id=206

http://www.pam.edu.ge/ref/refeng958901_Ref%20Eng.pdf

[75] Baxşəliyev V.İ., Məmmədov F.Q., Həsənov Z.D. NEFT VƏ QAZIN NƏQLİ ZAMANI İSTİFADƏ OLUNAN MAGİSTRAL BORU KƏMƏRLƏRİNİN NƏZƏRİ VƏ PRAKTİKİ ANALİZİ. “Azərbaycanın nəqliyyatı: nailiyyətlər, problemlər və perspektivlər” mövzusunda Respublika Elmi konfransının materialları, Bakı, 16-17 aprel 2019, s.6-9

[76] Бахшалиев В.И., Саламов А.А., Исмаил И.А. К ВОПРОСУ ИЗНАШИВАНИЯ САМОСМАЗЫВАЮЩИХСЯ НАНОПОВЕРХНОСТЕЙ ПОДШИПНИКОВ СКОЛЬЖЕНИЯ. Тезисы докладов Международной научно-технической конференции «Полимерные композиты и трибология» (Policomtrib - 2019), 25-28 июня 2019, Гомель, Беларусь, 25-28 июня 2019, с. 216 http://mpri.org.by/assets/files/PolyComTrib2019-Thezis17-07-19-word.pdf Arxivləşdirilib 2021-09-25 at the Wayback Machine

[77] Baxşəli V.İ., Qəhrəmanov F.Q. Uzun ölçülü artilleriya qurğularında tətbiq olunan istiliyə davamlı materiallar. “Maqnityumşaq ərintilərin informasiya texnologiyalarında və hərbi sənayedə tətbiqi perspektivləri” mövzusunda Beynəlxalq elmi-praktik konfransın materialları, Bakı, 09-10 oktyabr 2019 – cu il, s. 238-242

[78] Baxşəli V.İ., Qəhrəmanov F.Q., İsmayıl İ.A. Yüksək temperaturda porşen həlqələri materialının sürtünmə prosesinin tədqiqi. “Azərbaycan və Türkiyə Universitetləri: təhsil, elm, texnologiya" Beynəlxalq elmi-praktiki konfransın materialları,18-20 dekabr 2019-cu il, s. 312-315

http://aztu.edu.az/azp/resources/down/konf_mat_tom_3.pdf

[79] Baxşəliyev V.İ, İsmayıl İ.A. Porşenli maşınlarda sürtünmə prosesinin analizi və porşen halqaların materiallarının seçilməsi üsullarının işlənməsi, Azərbaycan Neft Təsərrüfatı j., 2019, N 10, s. 35-38

http://ant.socar.az/ant-socar/journal/view/166 Arxivləşdirilib 2019-12-05 at the Wayback Machine

https://www.elibrary.ru/item.asp?id=41222203

[80] Valeh I. BAKHSHALI. Nanomechanics and its applications: mechanical properties of materials.Proc. Of the International E-Conference on Advances in Engineering, Technology and Management - ICETM 2020. Copyright © Institute of Research Engineers and Doctors, USA, 31 May 2020, pp. 77–81

https://www.seekdl.org/conferences/paper/details/10523.html

file:///C:/Users/user/Downloads/20200602_081825.pdf

[81] Baxşəli V.İ., Qəhrəmanov F.Q., Cəfərov Y.Ə. Neft və qaz sənayesində istifadə olunan materialların tribotexniki xassələrinin yüksəldilməsi metodlarının işlənməsinə dair. Azərbaycan Ali Texniki Məktəblərinin xəbərləri, cild 22, buraxılış 1(123), Bakı, 2020, s.57-62

[82] V.Bakhshali, F.Qahramanov, E.Aslanov, I.Ismail, A.Bekirova. Investigation of the tribotechnical properties of the materials for piston machines.Inter. scient. J. of IFToMM “Problems of Mechanics”, 2020, No 2 (74), pp. 21–28

http://www.pam.edu.ge/issue?id=79

[83] Bakhshali V., Mardanov N. TO INCREASE THE RELIABILITY AND STABILITY OF ROTATING MACHINES USING DATA-DRIVEN SENSORS. Second International Scientific-Practical Conference: Modern Information, Measurement and Control Systems: Problems and Perspectives, CONFERENCE PROCEEDINGS. Tezislər toplusu. 07-08 December, 2020, Baku, Azerbaijan, P. 302-303

https://cloud.mail.ru/stock/cFEktNaXK8ToRFHBbq8zCabi/DEiZR4Aiynx/Conference%20Proceedings%20MIMCS-2020%20_e_ISBN.pdf

[84] Bakhshali V., Mardanov N., Bekirova A. Development of methods for processing acoustic emission signals of sensors for the compressor-pump station's control. 11th International Conference on Theory and Application of Soft Computing, Computing with Words, Perception and Artificial Intelligence ICSCCW-2021, Antalya, 23-24 August 2021

https://icsccw2021.com/schedule-tab/ Arxivləşdirilib 2021-09-25 at the Wayback Machine

Konfranslar[redaktə | mənbəni redaktə et]

  1. Кадиров Н.Б., Бахшалиев В.И. Влияние конструктивных и рабочих параметров поршневого компрессора на механические потери и износостойкость деталей кривошипно-шатунного механизма / Материалы междун. Науч. Конф. «Износ в машинах и методы защиты от него», Москва, 1985, с. 138-139
  2. Бахшалиев В.И. К характеру износа стенки цилиндра компрессора / Тезисы докл. науч. тех. конф. «Триботехнические проб. Нефтян. оборудования», Баку, 1992, с. 29-30
  3. Bakhshaliev V.I.: The problems of stability of “floating” connecting rod of a crank – piston mechanism. Proceedings of the 7th international machine design and production conference (1996), Ankara, Turkey, 11-13 September, p. 111-116
  4. Bakhshaliev V.I.: The problem of determination of the mechanical losses in essential bearings of a piston machine. Transactions of the 3d International scientific practical conference “Khazarneftgasyatag-98”( 1998), Baku, November 10-13, p. 158
  5. Gurbanov R.S., BakhshalievV.I.: On reliability of flexible powerful belt operation. Transactions of the International conference of the problems of applied mechanical engineering (2000), Tbilisi, Georgia, 8-10 November, p. 115-120
  6. Бахшалиев В.И. К вопросу возникновения ударных явлений в шатунных подшипниках поршневых машин / Материалы докладов учебно-методических конференции АзТУ, III часть, 2000, с. 431-434
  7. Bakhshaliev V.I.: Account of vertical oscillation of foundation of piston machine using in oil industry. Transactions of the 5th International scientific practical conference “Khazarneftgasyatag -2002” (2002), Baku, November 18-19, p. 181-182
  8. Бахшалиев В.И. К вопросу расчета трансмагистральных газопроводов / Материалы международной научно-технической конференции Ассоциации университетов прикаспийских стран, Баку, 2003, с. 96-100
  9. Bakhshaliev V.I.: Method of account of pressure losses of gas flow transporting by pipeline. Transactions of the 6th International scientific practical conference “Khazarneftgasyatag -2004”(2004), Baku, p. 186-191
  10. Бахшалиев В.И. Тепловой расчет подшипника скольжения на основе гидродинамической теории смазки / Материалы 51-й учебно-метод. и науч.-техн. конференции АзТУ, Баку, 2004, с. 231-234
  11. Baxşəliyev V.İ. Yeni fundament / «Azərbaycan alimlərinin sosial-iqtisadi inkişafında rolu» elmi-praktiki konfransın materialları, Bakı, 2005, s. 216
  12. Bakhshaliev V.I., Aslan-zada F.E. Calculation of oscillations in the crankshaft of piston machines applicable to oil industry. Transactions of the 8th International scientific practical conference “Khazarneftgasyatag -2008” (2008), Baku, 5-6 November 2008, N3, pp. 74–75
  13. Bakhshaliev V.I. Prospects of continuous education system and e-government in Azerbaijan, International scientific conference “The e-government in Azerbaijan: achievements and prospects”, 26-28 April, 2010, с. 171-174
  14. Baxşəliyev V.İ. Nanomexanika: porşenli maşınlarda sürtünmə prosesinin riyazi modelləşdirilməsinin yeni perspektivləri. AzTU-nun elmi əsərləri, “Yüksək texnologiyalar və ali təhsil” Beynəlxalq elmi-texniki konfransının materialları, 21-24 noyabr 2011, Bakı, s. 113-115
  15. Bakhshaliev V.I. Reliability and durability of Machines and Mechanisms used for oil and gas transportation in the Black Sea region. Final Conference of Networking on Science and Technology in the Black Sea Region, Bucharest, 11-12 December, 2012, pp. 6–9
  16. Valeh I. Bakhshaliev, Farhad E. Aslan-zada, Ismail A. Ismail. Development of innovative methods of fuzzy logic for increase of durability and reliability of piston machines used in oil industry / Seventh International Conference on Soft Computing, Computing with Words and Perceptions in System Analysis, Decision and Control - ICSCCW- 2013, Izmir, Turkey, September 2-3, 2013, p. 101-110 http://omerakin.etu.edu.tr/Call-for-Papers_ICSCCW-2013.pdf[ölü keçid]
  17. Bakhshaliev V.I. Technical security of the machines used in oil and gas pipelines. Black Sea Horizon project review workshop. Romania, Bucharest, 12th May 2015 http://www.increast.eu/en/703.php?vnr=1123[ölü keçid]
  18. Бахшалиев В.И., Исмаил И.А. К вопросу теплового расчета подшипника скольжения / Тезисы докладов международной начно - технической конференции «Полимерные композиты и трибология» (ПОЛИКОМТРИБ-2015), 23 - 26 июня 2015, Гомель, Беларусь, с. 94 http://mpri.org.by/assets/files/matconf/PolyComTrib2015-Thezis07-07-15.pdf Arxivləşdirilib 2016-08-02 at the Wayback Machine
  19. Bakhshaliev V. Increase of qualitative factors of the machines used on oil and gas pipeline - impact on technical security and environment / European Union Framework Programme for Research & Innovation Horizon 2020 Information Day : Climate Action, Energy, Health and Environment.1-2 July 2015, Baku, Azerbaijan http://www.inco-eap.net/en/435.php
  20. Bakhshaliev V. Machines and equipment used in oil and gas transportation in Caspian and Black Sea Region. - impact on environment / European Commission E&I Workshop: Public Participation and Transparency in the Implementation of Energy Policies, Belgrade, 25-26 February 2016, p. 9 https://ec.europa.eu/jrc/sites/default/files/Booklet_EI_RS1.pdf
  21. Bakhshaliev V.I. Increase of mechanical parameters of machines and equipment used on oil and gas transportation - technical security and impact on environment of oil pipeline / European Union Framework Programme for Research & Innovation Horizon 2020 Information Day: Climate Change, Energy, Health, Baku, 1-2 June 2016 http://www.inco-eap.net/_media/Agenda_H2020_Info_Day_v25May2016.pdf
  22. Bakhshaliev V.I., Aslanov E.A., Ismail I.A. Investigation the mechanical properties of the parts of piston machines used in oil industry / International scientific-technical conference «Intellectual technologies in mechanical engineering», Baku, 28-30 September 2016
  23. Bakhshaliev V.I. Prospects of the EU Framework Programme for Research and Innovation HORIZON2020 for Azerbaijan researchers / International scientific-technical conference «Intellectual technologies in mechanical engineering», Baku, 28-30 September 2016
  24. Bakhshaliev V.I. Increase of mechanical properties of machines and equipment used on oil and gas transportation - technical security of oil and gas pipelines and impact on environment / Horizon 2020 Brokerage Event "Nanotechnologies and Advanced Materials", Cambridge (UK), 4 April 2017

https://www.b2match.eu/h2020nmp2017/participants/144[ölü keçid]